1. Firstly, please turn off the computer and unplug the power cord.

2. Find out the M.2 SSD slot on the motherboard

(Since the design of each motherboard is different, please refer to the user manual of the motherboard for the specific location.)

3. Insert M.2 SSD

Due to the difference design of the motherboard, please remove the heat-sink or screws on the motherboard before installing the M.2 SSD product* And make sure that the M.2 SSD matches the slot interface.

*1: Please remove all screws from the M.2 SSD slot and make sure that there is no other obstructions.

*2：When installing the SSD, please carefully hold the left and right sides of the M.2 SSD product, align the product connector with the slot notch, then insert it into the M.2 slot at a 20-degree angle, and screw it into the mounting hole on the motherboard.

4、Complete the assembly and start the computer

Before starting, please check if there are any screws, parts or accessories on the motherboard.

5、Precautions

*Avoiding directly touch with PCB components during installation to avoid damage caused by static electricity.

*When tightening the SSD, be careful not to collide with the IC components on the motherboard and avoiding to cause them off.

*The installation method of industrial-grade M.2 SSD is similar to personal computer.